Acquaviva chrome thermostatic shower controls on a tiled wall

Mixer Taps vs Normal Taps for Bathrooms

Should you get a mixer tap or a normal tap for your bathroom? It is a common question when planning a new bathroom. Both have their place. This guide explains mixer taps vs normal taps in simple terms, so you can choose what suits your home, budget, and water supply.

For all tap types, see our main guide to bathroom taps: types, designs and price.

What Is a Normal Tap?

A normal tap, like a pillar tap or bib tap, controls one water supply. In most Indian homes, that is cold water. You turn the handle to open or close the flow. If you want hot water, you need a second tap connected to the geyser.

What Is a Mixer Tap?

A mixer tap connects to both hot and cold water lines. It blends them inside the tap and gives you one stream at the temperature you choose. There are two main styles:

  • Single lever mixer: One handle. Lift for flow, turn for temperature.
  • Two-handle mixer: One handle for hot, one for cold, with a shared spout.

Mixer Taps vs Normal Taps: Quick Comparison

Factor Normal Tap Mixer Tap
Water supply One line (usually cold) Hot and cold
Temperature control No Yes, easy to adjust
Ease of use Simple Very easy with single lever
Look Basic Modern
Cost Lower Higher
Plumbing Simple Needs hot water line to the tap

Benefits of Mixer Taps

  • Comfort: Warm water for washing in the morning or during the monsoon.
  • Safety: No sudden blasts of very hot water once the temperature is set.
  • Water saving: You reach the right temperature faster, so less water runs to waste.
  • Style: A single sleek tap looks cleaner than two separate taps.

When a Normal Tap Makes Sense

  • Bucket bath areas or washing zones where only cold water is needed.
  • Utility areas and balconies.
  • Tight budgets.
  • Homes without a hot water line to the basin.

Bathroom Taps and Showers: Using Mixers in the Shower

Mixers are even more useful in the shower. A wall mixer with a diverter lets you switch between an overhead shower, a hand shower, and a bucket spout. Some homes use a thermostatic mixer, which keeps the water temperature steady even if pressure changes. This is safer for kids and elders.

Things to Check Before Buying a Mixer

  1. Hot water supply: Make sure a hot water line can reach the basin or shower.
  2. Water pressure: Mixers work best when hot and cold pressure are similar. Ask us if your home uses an overhead tank.
  3. Cartridge quality: Ceramic disc cartridges are smooth and last long.
  4. Body material: Solid brass is best.
  5. Aerator: Helps save water. Efficient basin taps flow at about 1.5 gallons (5.7 litres) per minute or less, the limit used by the WaterSense programme explained by IAPMO.

Can You Switch From Normal Taps to Mixers?

Yes, but you may need a plumber to run a hot water line to the tap point. This is easiest during a renovation, before the walls are tiled.

See Mixer Taps in Chennai

Want to feel the difference? Visit our bathroom fittings showroom in Chennai to try single lever, two-handle, and thermostatic mixers. Our team can also check if your plumbing suits a mixer.

FAQs

Are mixer taps better than normal taps?

For basins and showers with hot water, yes. They are more comfortable and save water. For cold-only points, a normal tap is fine.

Do mixer taps need high water pressure?

They work best with balanced hot and cold pressure. Low-pressure models are available for overhead tank systems.

Can I use a mixer tap without hot water?

Yes, but you lose the main benefit. Connect only cold, or plan a hot line for later.

tnccadmin